top of page
SAMPE Conference & Exhibition
Technical Papers
Technical Paper Presentations Schedule
As of March 14, 2024. Schedule is subject to change.
Click on the track tile below to view the technical papers or download a printable version here.
Additive Manufacturing
Date/Time | Paper Title | Speaker | Company |
|---|---|---|---|
Wednesday 05/22
9:00am -9:25am | Low-cost Composite Tooling using Additive Manufacturing Frontally Cured Morphogenic Composites | Jeffery Baur | UIUC |
Wednesday 05/22
9:30am -9:55am | Comparative Analysis of Water-Induced Response in 3D-Printed Scf/Abs Composites Under Controlled Diffusion | Samiul Alam | Utah State University |
Wednesday 05/22
10:00am -10:25am | Design of Extruder with Metering Section Removed and Replaced with Gear Pump For Machine Space Savings in Large Format Additive Manufacturing | Emily Piatt | University of Cincinnati |
Wednesday 05/22
10:30am -10:55am | Laser Sintering of RTM385-SLS Thermoset Polyimide with Boron Nitride | Kathy Chuang | NASA Glenn Research Center |
Wednesday 05/22
2:00pm -2:25pm | Fabrication of Thermal Protection Systems Via 5-Axis Additive Manufacturing | Alison Kennedy | University of Southern California |
Wednesday 05/22
2:30pm -2:55pm | Revolutionizing Additive Manufacturing: Advancing Elongated Structural Component Production with Infinite Z-Axis Printing | Velda Soydas | Texas A&M University-Kingsville |
Wednesday 05/22
3:00pm -3:25pm | An Integrated Additive Simulation Workflow for Enhanced Fused Deposition Modeling: Simulation, Compensation, and Experimental Validation | Mallikharjun Marrey | AlphaSTAR Technology Solutions |
Wednesday 05/22
3:30pm -3:55pm | Adaptive Layer Time Control in Large Format Additive Manufacturing Via a Physics-Based Model | Seokpum Kim | Oak Ridge National Laboratory |
Wednesday 05/22
4:00pm -4:25pm | Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks | Mina Ghabbour | The Aerospace Corporation |
Wednesday 05/22
4:30pm -4:55pm | Utilizing Nature-Inspired Designs in 3D-Printed Materials for Enhanced Resistance to High-Velocity Impacts | Seyed Hamid Reza Sanei | Pennsylvania State University |
Advances in Composites Manufacturing Technology
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Tuesday 05/21
1:00pm -1:25pm | Ai-Driven Robotic-Tool Selection for Draping Composite Preforms Based on a Geometric Surface Segmentation Approach. | Moritz Lennartz | Institut für Textiltechnik of RWTH Aachen University |
Tuesday 05/21
1:30pm -1:55pm | A Smart Robotic Cell for Automated Layup of Carbon-Carbon Composites | Steven Nutt | University of Southern California |
Tuesday 05/21
2:00pm -2:25pm | In-Situ Consolidation Thermoplastic Process Development for Toolless Automated Fiber Placement Manufacturing in Space | Waruna Seneviratne | National Institute for Aviation Research/WSU |
Tuesday 05/21
2:30pm -2:55pm | High char yield and flowable preceramic resin enabled with the monomer functionalized SiC Particle | Rahul Pandey | SRI International |
Tuesday 05/21
3:00pm -3:25pm | Hydraulic bulge forming comparison of continuous and stretch broken carbon fiber prepreg laminates | Yoni Shchemelinin | Montana State University, Bozeman |
Tuesday 05/21
3:30pm -3:55pm | Chemical Vapor Deposition/Infiltration of Hafnium Diboride on Carbon Fiber with a Pyrolytic Carbon Interfacial Coating | Seth Shuster | University of Connecticut |
Tuesday 05/21
4:00pm -4:25pm | Expanding the Temperature Capabilities and Improving the Producability of Core-Stiffened Bismaleimide Structure | Evan Lloyd | Th Boeing Company |
Tuesday 05/21
4:30pm -4:55pm | Innovations in Composite Laminates: Experimental Exploration of SMA Wire Integration | Dr. Peter Bishay | California State University, Northridge |
Tuesday 05/21
1:00pm -1:25pm | Effect of Cure and Conditioning on the Mechanical Behavior of MTM 45-1 Woven Carbon Epoxy Composite | Casey Keulen | University of British Columbia |
Tuesday 05/21
1:30pm -1:55pm | Engineering Microporous Structures in 3D Printed Corn-Based Composites Through Thermomechanical Treatment | Md Nurul Islam | University of Oklahoma |
Tuesday 05/21
2:00pm -2:25pm | Sustainable, Fire-Resistant Building Materials from Furan-Based Epoxy Resins and Natural Fiber Composites | Amy Honnig Bassett | Rowan University |
Tuesday 05/21
2:30pm -2:55pm | Repair Potential of Polymeric Cold Spray for Impact-Damaged GFRP Composites | Ibnaj Anamika Anni | Rowan University |
Tuesday 05/21
3:00pm -3:25pm | Eco-Friendly Composites: Fabrication And Characterization Of Polymer Composites Made From Bio-Based Curing Agent | Nachiket Makh | North Carolina A&T State University, Greensboro |
Wednesday 05/22
8:00am -8:25am | Effect of Ball Milling on the Magnetic Performance of Strontium Ferrite (SrFe12O19) Powders | Arigbabowo Oluwasola K. | Texas State University |
Wednesday 05/22
8:30am -8:55am | Development of a Low Thermal Expansion Nanocomposite Resin for MSLA 3D Printer | Sufian Muhammad Abu | Texas State University |
Wednesday 05/22
9:00am -9:25am | Evaluating the Role of Benzoxazine Purity on Rheological amd Thermomechanical Properties | Benjamin Morasch | University of Southern Mississippi |
Wednesday 05/22
9:30am -9:55am | Comparison of Tool-Ply Slippage Characteristics of Continuous vs Stretch Broken Carbon Fiber Prepreg | Tasnia Javin Nur | Montana State University |
Wednesday 05/22
10:00am -10:25am | Machine Learning Enhanced Material Models for Composites Process Simulation | Goran Fernlund | Convergent Manufacturing Technologies |
Wednesday 05/22
10:30am -10:55am | Real-Time Material Certification of Composites Using a Digital Twin | Yuksel Yabansu | HRL Laboratories |
Wednesday 05/22
2:00pm -2:25pm | Characterization Of Diffusion In Epoxy Resin Using Atomic Force Microscopy Analysis | Olivia Blank | Montana State University |
Wednesday 05/22
2:30pm -2:55pm | Development of Cure Kinetics Model, Viscosity Model and Fiber Bed Compaction Curve for Cycom® Ep2750 | Salma El Euch | Centre technologique en aérospatiale (CTA) |
Wednesday 05/22
3:00pm -3:25pm | Tensile Strength Uncertainty Quantification in a Prepreg Platelet Compression Molded Composite Considering the Statistical Distribution of Platelets Shape and Size | Maggie Chong | UBC |
Wednesday 05/22
3:30pm -3:55pm | Performance of Stretch-Steered Aligned Discontinuous Fiber Tape with Automated Fiber Placement | Aidan Ford | University of Delaware - Center for Composite Materials |
Wednesday 05/22
4:00pm -4:25pm | Scalable, Infiltration-Free Ceramic Matrix Composite Manufacturing | Junhua Wei | PARC, part of SRI international |
Wednesday 05/22
4:30pm -4:55pm | On Drapability and Characterization of Flax Fabric Reinforcements | Olivia Margoto | The University of British Columbia |
Wednesday 05/22
8:30am -8:55am | ITAR Presentation | ||
Wednesday 05/22
10:00am -10:25am | Flexible Fusion Process via Hot Powder Bed Compaction: Case for Additive Manufacturing of Topology Optimized Structures | Jimesh Bhagatji | Composites Modeling and Manufacturing, Old Dominion University |
Wednesday 05/22
10:30am -10:55am | Advancements in Lightweight Reinforced Thermoplastic Composites: Versatile Flat Sheet Manufacturing and Applications | Liqing Wei | Hanwha Azdel, Inc. |
Thursday 05/23
9:30am -9:55am | The Design, Fabrication, and Inspection Of Tow-Steered Composite Panels Including the Effects of Intentional Defects | Cyrus Kosztowny | NASA Langley Research Center |
Thursday 05/23
10:00am -10:25am | Manufacturability of a Prseus-Based Conformal Cryogenic Propellant Tank | Shuvam Saha | M4 Engineering, Inc. |
Thursday 05/23
10:30am -10:55am | Ultrasonic Welding Process Development for Thermoplastic Aircraft Fuselage Skin Panel | Waruna Seneviratne | National Institute for Aviation Research/WSU |
Thursday 05/23
11:00am -11:25am | Investigation of the Shape-Memory Capabilities of Stretched Thermoplastic Polymers for Mandrel Production | Fabian Neumann | German Aerospace Center |
Thursday 05/23
11:30am -11:55am | Additively Manufactured Low-Cost Resin Transfer Molding Tooling with Embedded Flow Monitoring Sensors to Manufacture High-Performance Composites | Khalid Aldhahri | University of Delaware Center for Composite Materials |
Clean & Sustainable Energy
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Wednesday 05/22
2:00pm -2:25pm | Thermal Decomposition Analysis of Electrode Materials for Enhanced Energy Storage System | Andekuba Andezai | University of Cincinnati |
Wednesday 05/22
2:30pm -2:55pm | Properties Of Hybrid Conducting Polymer-Graphene Electrode | Andekuba Andezai | University of Cincinnati |
Design, Analysis, and Simulation
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Tuesday 05/21
1:30pm -1:55pm | Accelerated Aging of Adhesively Bonded Composite Joints for Use in Material Screening and Selection during Development: A Review and Proposed Model | Marie Flanigan | Lockheed Martin |
Tuesday 05/21
2:00pm -2:25pm | Stress Relaxation in Accelerated Testing of Adhesively Bonded Stacks | Felix Chen | Kymeta Corporation |
Tuesday 05/21
2:30pm -2:55pm | End-To-End Simulation Framework for Injection Molding Process Optimization | Nikhil Garg | Oak Ridge National Laboratory |
Tuesday 05/21
3:00pm -3:25pm | Studies on Type 3 Composite-Overwrapped Pressure Vessels (COPV’s): Optimization Using an Elasticity Approach | William Avery | Cannon Engineering |
Tuesday 05/21
3:30pm -3:55pm | Holistic Digital Product Development Process for Tailored Fibre Placement Reinforced Parts | Rebecca Emmerich | Institut für Textiltechnik of RWTH Aachen University |
Tuesday 05/21
4:00pm -4:25pm | Numerical Analysis of Damage Resistance of A Long Discontinuous Fiber Composite to a Drop-Weight Impact Event | Marco Didone | Department of Materials Engineering, The University of British Columbia |
Wednesday 05/22
8:00am -8:25am | Towards The Development Of An Fds Model For Evaluating The Effects Of Critical Parameters On The Flame Spread Behaviour Of Isds In Bangladesh | Swagata Dutta | Bangladesh University of Engineering and Technology |
Wednesday 05/22
8:30am -8:55am | Development of A Tool for Automated Cure Kinetics Investication and Uncertainty Quantification | Matthew Kirby | Southwest Research Institute |
Thursday 05/23
9:30am -9:55am | Numerical Modeling of a Double Gyroid Composite Component’s Damping Characteristics | Jagadeep Thota | University of Wisconsin-Green Bay |
Thursday 05/23
10:00am -10:25am | Prediction of Process-Induced Deformations of Semi-Crystalline Thermoplastic Composites | Anoush Poursartip | Convergent Manufacturing Technologies |
Thursday 05/23
10:30am -10:55am | Optimized Drive Shafts in Sandwich Design Offer High Weight Savings | Patrick Pasberg | Institut für Textiltechnik of RWTH Aachen University |
Thursday 05/23
11:00am -11:25am | The Digital Twin of a Material – What Is It And How It Is Changing The Way We Design Airplanes | Mahesh Chengalva | Boeing |
Thursday 05/23
11:30am -11:55am | Material Characterisation of Biaxial Glass-Fibre Woven Fabrics as a Function of Weave Pattern using Picture Frame Tests and Microscopic Analysis | Shantanu Bhat | Institut für Textiltechnik of RWTH Aachen University |
Tuesday 05/21
1:00pm -1:25pm | Progressive Failure Analysis for Predicting Ultimate and Residual Strength of Composite Bonded Repairs | John Lin | Boeing |
Design, Analysis, and Simulation (Dr.Frank Abdi Memorial)
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Tuesday 05/21
4:00pm -4:25pm | Progress in Modeling and Simulation for Extrusion Deposition Additive Manufacturing (Edam): A Review | Vlastimil Kunc | Oak Ridge National Laboratory |
Tuesday 05/21
4:30pm -4:55pm | Material State Monitoring System | Hiroshi Ide | GreenVirtue Corp. |
Wednesday 05/22
8:00am -8:25am | Machine Learning-Based Models for Delamination Detection in a Composite Laminate | Ali Najafi | ANSYS Inc. |
Wednesday 05/22
8:30am -8:55am | Seeds of Genoa; a historical perspective of Frank Abdi’s early aero-thermal-composite structures interaction simulation developments at Rockwell in the 1980s and impact on Aeroelastic Research at Cal Poly Pomona. | Steven Dobbs | Cal Poly Pomona |
Wednesday 05/22
9:00am -9:25am | Virtual Testing of Fatigue/Creep/Environmental Cracking using a Meso-scale Fracture Mechanics Model | kamran nikbin | Alphastar Corp |
Wednesday 05/22
9:30am -9:55am | Fast Analytical Homogenization for Large Scale Additive Manufacturing | Christopher Bock | University of Maine |
Wednesday 05/22
10:00am -10:25am | Coupled Topology and Process Optimization in Powder Bed Fusion Additive Manufacturing | Matthew Ireland | Advanced Structures and Composites Center, University of Maine |
Wednesday 05/22
10:30am -10:55am | Collision Provoked Failure Sequencing In Space Reentry Vehicles | Javid Bayandor | CRASH Lab, University at Buffalo - The State University of New York |
Wednesday 05/22
10:30am -10:55am | Soft Impact Damage Prognosis of F-16 Canopy Using Progressive Failure Dynamic Analysis | Javid Bayandor | CRASH Lab, University at Buffalo - The State University of New York |
Wednesday 05/22
2:30pm -2:55pm | Modeling of Over molded Discontinuous-Continuous Fiber Composites | Uday Vaidya | University of Tennessee, Knoxville |
Wednesday 05/22
3:00pm -3:25pm | New Ideas for Tall Composite Wind Turbine Towers: Adapting to a Sustainable Future | Clement Hiel | CSSI - Advanced Products Development |
Wednesday 05/22
3:30pm -3:55pm | Use of Electrical Resistance to Assess Damage Development in a Laminate Ceramic Composite Subject to Foreign Object Damage and Fatigue | Gregory Morscher | University of Akron |
Wednesday 05/22
4:00pm -4:25pm | Numerically Solving Partial Differential Equations Using Series Solutions, and Least Squares Methods | James Brown | Retired Aerospace Stress Analyst |
Wednesday 05/22
4:30pm -4:55pm | Tribute to Frank Abdi: Advancements in Composite Material Modeling and Impact on Simulation Software | Zafer Gurdal | University of South Carolina |
Emergent Materials & Applications
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Tuesday 05/21
1:00pm -1:25pm | New Kevlar® Paper Enables Ultra-Lightweight Aerostructures for More Sustainable Aviation | Dariusz Kawka | DuPont Water & Protection - Aramids |
Tuesday 05/21
1:30pm -1:55pm | Cleaning and Utilization of Waste Coal for Graphite Applications | Dwayne Morgan | Touchstone Research Laboratory |
Tuesday 05/21
2:00pm -2:25pm | Characterization of Carbon Nanotube-Polyurethane Sheet using Screen Printing Technology for Compression and Impact Sensing | Yu-Jin Jung | Hanyang University ERICA |
Tuesday 05/21
2:30pm -2:55pm | Preliminary Application Studies On Transparent Composites That Achieve Both High Optical And Mechanical Properties | Ayumi Takaoka | Kaneka Aerospace LLC |
Tuesday 05/21
3:00pm -3:25pm | Enabling US Domestic Supply and Manufacturing Chain for Advanced Carbon Products | Chetan Tambe | AmeriCarbon Products LLC |
Tuesday 05/21
3:30pm -3:55pm | Manufacturing of Stretchable Wavy-Patterned Fiber-Reinforced Elastomer Composites and its Behavior Under Tensile Loading Condition | Garam Kim | Purdue University |
Tuesday 05/21
4:00pm -4:25pm | Frustration of Thermoset Network Packing by Tunable Aromatic Backbone Isomerism for Matrix Strain Capability Control | Andrew Hollcraft | University of Southern Mississippi |
Tuesday 05/21
4:30pm -4:55pm | Characterization of Carbon Foam Products Made from Coal at Atmospheric Pressure | Rudolph Olson III | CONSOL Innovations |
Wednesday 05/22
8:00am -8:25am | Carbon Aerogels from Furan-Based Polybenzoxazine Precursors | Michael Chauby | Rowan University |
Wednesday 05/22
8:30am -8:55am | Natural Carbon-Enhanced Composite Material for Sustainable Additive Manufacturing Applications | Grace Baranack | Institute for Sustainable Energy and the Evironment at Ohio University |
Wednesday 05/22
9:00am -9:25am | Pliable, fast-cure epoxy-fiberglass sheet molding compound with extensive out-life | Ruchir Shanbhag | Lattice Composites |
Wednesday 05/22
9:30am -9:55am | Interfacial Adhesion And Electrical Properties Of Mwcnt In Polyurethane Nanocomposites Coating Via Electrical Resistance Mapping For Composite Aircraft Topcoat | Joung-Man Park | Gyeongsang National University/PC&IL |
Thursday 05/23
9:30am -9:55am | SolvaLite® 716FR: A Rapid Cure Self-extinguishing Epoxy System for Battery Enclosures | Rhys Tapper | Solvay |
Thursday 05/23
10:00am -10:25am | Cellulose Nanofibrils Hydrophobized by a One-Pot Aqueous Process for Composite Reinforcement | Kevin Oesef | University of British Columbia |
Thursday 05/23
10:30am -10:55am | Free-Standing Hierarchical Graphene Oxide/Carbon Nanofiber Structure | Ephraim Zegeye | Liberty University |
Thursday 05/23
11:00am -11:25am | Carbon Nanotube and Silver Nanowire Functionalized Composites for Frequency Selective Electromagnetic Interference Shielding | Matthew Kurilich | FAMU-FSU College of Engineering |
Thursday 05/23
11:30am -11:55am | Exploring the Effects of Microstructure on the Strain Sensing Behavior of Carbon Nanotube and Carbon Nanotube Hybrid Films | Joshua Degraff | Florida State University |
Factory of the Future
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Wednesday 05/22
2:30pm -2:55pm | Troubleshooting Common Prepreg Cure Failure Modes with Rheological Measurements | Unal Yilmazoglu | Alpha Technologies |
Wednesday 05/22
3:00pm -3:25pm | Ai-Enabled Automatic Inspection in Wind Turbine Blade Manufacturing: Technology Validation and Demonstration | Scott Blake | Aligned Vision |
Wednesday 05/22
3:30pm -3:55pm | Advanced Process Monitoring and Control for CFRP RTM in Aerospace without compromises | Nikos Pantelelis | Synthesites |
Wednesday 05/22
2:00pm -2:25pm | Detecting Composite Deviations during Molding with Real-Time Sensor Data | Alec Redmann | NETZSCH |
Government Program -NASA HiCAM
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Wednesday 05/22
3:00pm -3:25pm | ITAR Presentation (Information Coming Soon) | ||
Wednesday 05/22
2:30pm -2:55pm | ITAR Presentation (Information Coming Soon) | ||
Wednesday 05/22
3:30pm -3:55pm | Design For Inspection: A Formalized Approach To Evaluating The Inspectability Of Aerospace Structures Early In The Design Process | Peter Juarez | NASA |
Wednesday 05/22
4:00pm -4:25pm | Automated Ply-by-Ply Lamination and In-Situ Consolidation of Thermoplastic Composite High-Contour Stiffeners for High-Rate Aircraft Manufacturing | Susan Rich | Northrop Grumman |
Wednesday 05/22
4:30pm -4:55pm | Automated Ply-By-Ply Lamination and in-Situ Consolidation of Dry Carbon Fiber Non-Crimp Fabrics for High-Rate Aircraft Manufacturing of Structural Aircraft Components | Susan Rich | Northrop Grumman |
Thursday 05/23
9:30am -9:55am | Integration of Structural Analysis and Manufacturing Process Planning for Global Optimization with Automated Fiber Placement | August Noevere | Collier Aerospace |
Thursday 05/23
10:00am -10:25am | Composites From In-Situ Consolidation Automated Fiber Placement of Thermoplastics for High-Rate Aircraft Manufacturing | Roberto Cano | NASA Langley Research Center |
Thursday 05/23
10:30am -10:55am | Laser Angle of Incidence Effects on In-Situ Consolidation of Automated Fiber Placement of Polyaryletherketone Composites | Brian Grimsley | NASA Langley Research Center |
Thursday 05/23
11:00am -11:25am | Thermal Modelling of The In-Situ Consolidation of Automated Fiber Placement of Thermoplastic Composites | Christopher Stelter | NASA Langley Research Center |
Thursday 05/23
11:30am -11:55am | Thermoplastic Aircraft Manufacturing Model | Joseph Heil | Spirit AeroSystems |
Joining, Assembly, Maintenance & Repair
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Tuesday 05/21
1:00pm -1:25pm | The Development Of A Uv Curable Material For High Rate Aerospace Manufacturing And Repair | Jessica Wallick | Solvay |
Tuesday 05/21
1:30pm -1:55pm | Carbon Fiber and Hybrid C/Kevlar Composite to Metal Bonding and Analysis using the Weibull Distribution. | Alessandro Rengan | Central State University |
Tuesday 05/21
2:00pm -2:25pm | Investigation of Adhesive Joints for Printed Autoclave Modular Tooling | Jacob Montrose | Purdue University |
Tuesday 05/21
2:30pm -2:55pm | Assessing Mechanical-Adhesive Hybrid Joints for Segmented Wind Turbine Blades: A Parametric Study using Simulation Methods | Muhammad Ansari | University of Bristol |
Tuesday 05/21
3:00pm -3:25pm | Co-Cured Scarf Repairs | Carineh Ghafafian | University of Southern California |
Tuesday 05/21
3:30pm -3:55pm | The Effectiveness Of Cold Laser Ablation On The Remediation Of Contaminated Composite Surfaces | Joann Hilman | Brighton Science |
Tuesday 05/21
4:00pm -4:25pm | Nanomechanical Property Characterization of
Composite Adhesive Bonding Systems with High Temperature Exposures | Rita Olander | University of Washington |
Tuesday 05/21
4:30pm -4:55pm | Feasibility Study of Fiber-Oriented Scarf Repairs for Carbon Fiber Reinforced Composite Panels | Reewanshu Chadha | FAA William J. Hughes Technical Center (Diakon Solutions) |
Materials for Extreme Environments
Date | Paper Title | Speaker | Company Name |
|---|---|---|---|
Wednesday 05/22
10:00am -10:25am | ITAR Presentation (Information Coming Soon) | ||
Wednesday 05/22
10:30am -10:55am | ITAR Presentation (Information Coming Soon) | ||
Wednesday 05/22
9:30am -9:55am | ITAR Presentation (Information Coming Soon) | ||
Wednesday 05/22
2:00pm -2:25pm | ITAR Presentation (Information Coming Soon) | ||
Wednesday 05/22
4:00pm -4:25pm | Design And Testing Of A Multi-Material Joint For Cryogenic Hydrogen Flow | André Baeten | Technical University of Applied Sciences, Augsburg |
Wednesday 05/22
4:30pm -4:55pm | Evaluating Cure Environment Effect in the Formation of Silicon Oxycarbide Polymer Derived Ceramics | Virginia Mullins | University of Southern Mississippi |
Wednesday 05/22
10:00am -10:25am | Submerged Fatigue Testing of Marine Energy Advanced Materials | Ariel Lusty | National Renewable Energy Laboratory |
Wednesday 05/22
10:30am -10:55am | Post-Deployment Characterization of Glass Fiber-Reinforced Thermoset and Thermoplastic Composite Tidal Turbine Blades | Paul Murdy | National Renewable Energy Laboratory |
Sustainable Technologies & Circular Economy
Date | Paper Title | Speaker | Company |
|---|---|---|---|
Wednesday 05/22
3:00pm -3:25pm | Influence of Fibre Length Distribution on the Processing of Aligned Discontinuous Reclaimed Carbon Fibre Material | Patrick Sullivan | University of Bristol & National Composites Centre |
Wednesday 05/22
3:30pm -3:55pm | Cement Kiln Co-Processing for Managing End of Life Glass Fiber-Thermoset Composites: A Case Study Using Wind Turbine Blades | Mitchell Rencheck | Electric Power Research Institute |
Wednesday 05/22
4:00pm -4:25pm | Producing Multifunctional Pa6/Organosheet Composites with Sustainable Plant Based Graphene Coatings | Daniel Mulqueen | Climate Robotics |
Wednesday 05/22
4:30pm -4:55pm | Development of Rapid Electrolytic Method to Recycle Amine Cured Epoxy Carbon Fiber Reinforced Polymer Composites with Methyl Radicals | Y. Justin Lim | USC Department of Chemistry |
Thursday 05/23
10:00am -10:25am | Chitosan Membranes Developed for a Biomimetic Saltwater Cell | Ross Lee | Villanova University |
Thursday 05/23
10:30am -10:55am | Analyzing the Influence of Secondary Activation Temperature on Activated Biochar's Adsorption Behavior | Melike Dizbay-Onat | University of South Alabama |
Thursday 05/23
11:00am -11:25am | Renewable and Recyclable Thermosets for Continuous Carbon Fiber Recovery | Jaclyn McLaughlin | Rowan University |
Thursday 05/23
11:30am -11:55am | Decision-Support in Composite Sustainability and Circularity Evaluation | Ali Al-Lami | DLR |
Thursday 05/23
9:30am -9:55am | Influence of Organic Nucleating Agents on the Crystallization Behavior of Polylactic Acid | Peng Gao | Polymer Materials Engineering, Western Washington University |
Thermoplastic Materials & Processes
Date | Paper Title | Speaker | Comapny |
|---|---|---|---|
Wednesday 05/22
9:00am -9:25am | ITAR Presentation (Information Coming Soon) | ||
Tuesday 05/21
1:30pm -1:55pm | Effect Of Deposition Rate On Mechanical Properties Of An In-Situ Consolidated Lm-Paek Laminate Made With Laser Automated Fiber Placement | Will London | University of Maine |
Tuesday 05/21
1:00pm -1:25pm | Heat Generation Analysis During The Ultrasonic Welding Process In Thermoplastic Composite Joints | Felipe Savella | Louisiana State University (LSU) |
Tuesday 05/21
2:00pm -2:25pm | Revolutionary Joining Technology Cib ® Applications Of A Covalent Intermediate Bonding Technology | Jan Verhaeghe | AGESIA BV |
Tuesday 05/21
2:30pm -2:55pm | Vitrimers: Thermoplastic-Like Properties in a Thermoset Polymer for Fiber Reinforced Composites | Patricio Martinez Martinez | University of Southern California |
Tuesday 05/21
3:00pm -3:25pm | Characterization of A Test Bench System for Continuous Resistance Welding of Thermoplastic Composite Joints | Marc Palardy-Sim | National Research Council Canada |
Tuesday 05/21
3:30pm -3:55pm | Ultra-High-Rate Manufacturing of Thermoplastic Window Plug Using Hybrid Overmolding | Waruna Seneviratne | National Institute for Aviation Research/WSU |
Tuesday 05/21
4:00pm -4:25pm | Magnetic Properties Evaluation of Polyamide 4.6 Bonded Magnetic Composite | Pratik Uday Karkhanis | Texas State University |
Tuesday 05/21
4:30pm -4:55pm | Multi-Objective Optimisation of Tape Positioning in Injection Molded Components Considering Warpage Reduction | Martin Giersberg Sola | Institute for Plastics Processing at RWTH Aachen University |
Wednesday 05/22
8:00am -8:25am | Vacuum-Bag-Only (Vbo) Consolidation of Tc1225 T1100G Thermoplastic Composite Laminates Prepared Via Automated Fiber Placement (Afp) at Varied Nip Temperatures | Terry Hines | Toray Advanced Composites |
Wednesday 05/22
8:30am -8:55am | Recycled Carbon Fiber Reinforced Polyphenylene Sulphide In Aerospace | Ilse Bruggencate | TPAC - Saxion University of Applied Science |
Wednesday 05/22
9:00am -9:25am | Characterisation of Defects in Strand-Based Thermoplastic Composite Parts Using Ultrasonic Inspection | Hanae Pattery | Ecole de Technologie Supérieure |
Wednesday 05/22
9:30am -9:55am | Honeycomb Molding - Forming Thermoplastic Sandwich Structures for Interior Applications | Santino Wist | Institute for Textile Technology of the RWTH Aachen University |
Thursday 05/23
10:00am -10:25am | Modeling the Impact of Tool Geometry on Thickness Changes during the Thermoforming of a Thermoplastic Composite | James Sherwood | University of Massachusetts Lowell |
Thursday 05/23
10:30am -10:55am | Shape Compensation of Stamp Formed Thermoplastic Composites | Eduardo Barocio | Purdue University - CMSC |
Thursday 05/23
11:00am -11:25am | Inter- And Intra-Laminar Properties Of An Afp Post-Processed Thermoplastic Composite | Mehran Tehrani | University of California, San Diego |
Thursday 05/23
11:30am -11:55am | Thermally Conductive Melt-Processable Polyimide Hbn Micro-Composites for High Temperature Electrical Insulation Applications | Witold Fuchs | NASA |
Thursday 05/23
9:30am -9:55am | Induction Welding of Polyaryletherketone Thermoplastic Composites | Yiqiang Zhao | Solvay Composite Materials |
bottom of page